Difference between revisions of "Tools:OxCNC"

From Lancaster And Morecambe Makers
Jump to: navigation, search
(Tools in stock)
(Tooling Recommendations)
Line 14: Line 14:
 
* Carbide cutters will last longer and keep their edge
 
* Carbide cutters will last longer and keep their edge
 
* 3mm shank is the default collet that we have
 
* 3mm shank is the default collet that we have
* The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm but we don't have any collets other than 3mm
+
* The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm
 
* The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014
 
* The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014
  

Revision as of 10:14, 9 September 2016

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling Recommendations

When purchasing cutters, keep the following advice from Louis in mind:

Tools in stock