Difference between revisions of "Tools:OxCNC"

From Lancaster And Morecambe Makers
Jump to: navigation, search
(Tooling)
(Tools in stock)
Line 19: Line 19:
 
=== Tools in stock ===
 
=== Tools in stock ===
  
* 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide)
+
* 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910
* 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits
+
* 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247
* 10 x 3.175mm engraving bits
+
* 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924
  
 
[[Category:Tools]]
 
[[Category:Tools]]

Revision as of 19:03, 11 May 2016

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling Recommendations

When purchasing cutters, keep the following advice from Louis in mind:

  • Fewer flutes are better for the speed of the machine
  • Carbide cutters will last longer and keep their edge
  • 3mm shank is the default collet that we have
  • The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm but we don't have any collets other than 3mm
  • The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014

Tools in stock