Difference between revisions of "Tools:OxCNC"

From Lancaster And Morecambe Makers
Jump to: navigation, search
(Tooling Recommendations)
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
Current ongoing project and is not yet completed ready for general use.
  
== Wiring details ==
+
Talk to [[User talk:Idn|Idn]] or [[User talk:TBSliver|TBSliver]]
  
=== Stepper connectors ===
+
* Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md
  
OpenBuilds NEMA23 stepper motors - http://openbuildspartstore.com/nema-23-stepper-motor/
+
[[User:Idn|Idn]] ([[User talk:Idn|talk]]) 07:03, 9 December 2015 (PST)
  
1 - Green - coil 1
+
=== Tooling Recommendations ===
  
2 - Red - coil 1
+
When purchasing cutters, keep the following advice from Louis in mind:
  
3 - Yellow - coil 2
+
* Fewer flutes are better for the speed of the machine
 +
* Carbide cutters will last longer and keep their edge
 +
* The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm
 +
* The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014
  
4 - Blue - coil 2
+
=== Tools in stock ===
 +
 
 +
* Full set of collets from 1mm to 7mm in 0.5mm increments
 +
* 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910
 +
* 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247
 +
* 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924
  
 
[[Category:Tools]]
 
[[Category:Tools]]

Latest revision as of 10:17, 9 September 2016

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling Recommendations

When purchasing cutters, keep the following advice from Louis in mind:

Tools in stock