Tools:OxCNC

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

• Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling Recommendations

When purchasing cutters, keep the following advice from Louis in mind:

• Fewer flutes are better for the speed of the machine
• Carbide cutters will last longer and keep their edge
• The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm
• The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014

Tools in stock

• Full set of collets from 1mm to 7mm in 0.5mm increments
• 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910
• 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247
• 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924