Tools:OxCNC

From Lancaster And Morecambe Makers

Revision as of 14:19, 18 February 2016 by Adminidn (Talk | contribs) (Adminidn moved page Tools::OxCNC to Tools:OxCNC without leaving a redirect)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling

When purchasing cutters, keep the following advice from Louis in mind:

Fewer flutes are better for the speed of the machine
Carbide cutters will last longer and keep their edge
3mm shank is the default collet that we have
The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm but we don't have any collets other than 3mm
The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014

Retrieved from ‘https://wiki.lamm.space/w/index.php?title=Tools:OxCNC&oldid=222’

Tools