Difference between revisions of "Tools:OxCNC"

From Lancaster And Morecambe Makers
Jump to: navigation, search
(Spindle)
(Tooling Recommendations)
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
Current ongoing project and is not yet completed ready for general use.
  
== Wiring details ==
+
Talk to [[User talk:Idn|Idn]] or [[User talk:TBSliver|TBSliver]]
  
=== Stepper motors ===
+
* Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md
  
OpenBuilds NEMA23 stepper motors - http://openbuildspartstore.com/nema-23-stepper-motor/
+
[[User:Idn|Idn]] ([[User talk:Idn|talk]]) 07:03, 9 December 2015 (PST)
  
Parts:
+
=== Tooling Recommendations ===
  
* [http://cpc.farnell.com/pro-signal/psg01593/plug-multipole-panel-4p/dp/AV15051 Sockets - Circular Connector, Plug, 4, Pin, Solder, Panel Mount]
+
When purchasing cutters, keep the following advice from Louis in mind:
* [http://cpc.farnell.com/pro-signal/psg01590/socket-multipole-4p/dp/AV15048 Plugs - Circular Connector, Receptacle, 4, Socket, Solder, Cable Mount]
+
* <strike>[http://cpc.farnell.com/concordia-technologies/6011238/external-individually-screened/dp/CB18752 Cable - Green Multicore Screened Cable, 4, 22 AWG, 0.33 mm², 328 ft, 100 m]</strike>
+
* <strike>[http://cpc.farnell.com/pro-power/7-2-4a/cable-7-0-20mm-4c-unscreened-100m/dp/CB15174?ost=cb15174 Cable - PRO POWER  7-2-4A  Multicore Unscreened Cable, 4 Core, 0.22 mm², 7 x 0.2mm, 328 ft, 100 m]</strike>
+
* [http://uk.farnell.com/pro-power/pp000336/multicore-4-cond-0-5mm2-25m-440v/dp/2440120 Cable - Multicore Unscreened Cable, 4 Core, 0.5 mm², 16 x 0.2mm, 82.021 ft, 25 m]
+
  
 +
* Fewer flutes are better for the speed of the machine
 +
* Carbide cutters will last longer and keep their edge
 +
* The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm
 +
* The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014
  
Wiring:
+
=== Tools in stock ===
 
+
{| class="wikitable"
+
! Pin
+
! Colour
+
! Coil
+
|-
+
| 1
+
| Green
+
| Coil 1
+
|-
+
| 2
+
| Red
+
| Coil 1
+
|-
+
| 3
+
| Yellow
+
| Coil 2
+
|-
+
| 4
+
| Blue
+
| Coil 2
+
|}
+
 
+
=== Spindle ===
+
 
+
CNC 400W Brushless Spindle Motor ER11 & Mach3 PWM speed controller & Mount + PSU
+
 
+
* http://www.ebay.co.uk/itm/141684438281
+
 
+
{| class="wikitable"
+
! Pin
+
! Colour
+
|-
+
| Hall-
+
| Black (small)
+
|-
+
| HC
+
| White (small)
+
|-
+
| HB
+
| Green (small)
+
|-
+
| HA
+
| Blue (small)
+
|-
+
| Hall+
+
| Red (small)
+
|-
+
| Motor W
+
| Black (large)
+
|-
+
| Motor V
+
| White (large)
+
|-
+
| Motor U
+
| Red (large)
+
|}
+
  
 +
* Full set of collets from 1mm to 7mm in 0.5mm increments
 +
* 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910
 +
* 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247
 +
* 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924
  
 
[[Category:Tools]]
 
[[Category:Tools]]

Latest revision as of 10:17, 9 September 2016

Current ongoing project and is not yet completed ready for general use.

Talk to Idn or TBSliver

Idn (talk) 07:03, 9 December 2015 (PST)

Tooling Recommendations

When purchasing cutters, keep the following advice from Louis in mind:

Tools in stock