Difference between revisions of "Tools:OxCNC"
From Lancaster And Morecambe Makers
(→Stepper motors) |
(→Tooling Recommendations) |
||
| (11 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | Current ongoing project and is not yet completed ready for general use. | ||
| − | + | Talk to [[User talk:Idn|Idn]] or [[User talk:TBSliver|TBSliver]] | |
| − | + | * Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md | |
| − | + | [[User:Idn|Idn]] ([[User talk:Idn|talk]]) 07:03, 9 December 2015 (PST) | |
| − | + | === Tooling Recommendations === | |
| − | + | When purchasing cutters, keep the following advice from Louis in mind: | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | * Fewer flutes are better for the speed of the machine | ||
| + | * Carbide cutters will last longer and keep their edge | ||
| + | * The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm | ||
| + | * The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014 | ||
| − | + | === Tools in stock === | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | === | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| + | * Full set of collets from 1mm to 7mm in 0.5mm increments | ||
| + | * 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910 | ||
| + | * 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247 | ||
| + | * 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924 | ||
[[Category:Tools]] | [[Category:Tools]] | ||
Latest revision as of 10:17, 9 September 2016
Current ongoing project and is not yet completed ready for general use.
- Build documentation has been moved to https://github.com/lammspace/OxCNC/blob/master/build.md
Idn (talk) 07:03, 9 December 2015 (PST)
Tooling Recommendations
When purchasing cutters, keep the following advice from Louis in mind:
- Fewer flutes are better for the speed of the machine
- Carbide cutters will last longer and keep their edge
- The longer the tool, the thicker you need the shank. ER11 used in the machine has a maximum shank size of 7mm
- The following seller is recommended - http://stores.ebay.co.uk/cncpoorboytoolstore/Cutters-Carbide-/_i.html?_fsub=1167155014
Tools in stock
- Full set of collets from 1mm to 7mm in 0.5mm increments
- 5 x 4mm Wood Cutting CNC Router Bits Single Flute Tools 17mm (carbide) http://www.ebay.co.uk/itm/191436109910
- 10 x 3.175mm 1/8" Single Flute Carbide Spiral End Mill 25mm CNC Router Bits http://www.ebay.co.uk/itm/191618994247
- 10 x 3.175mm 20 degrees PCB engraving bits - http://www.ebay.co.uk/itm/152087083924
